UPVC Door Handles Replacement Guide
Once you have the correct measurements, replacing your upvc door handle is a simple DIY project. These measurements include the distance between the backplate's fixing centres (sometimes called PZ) and the center of the key hole.
The most popular type of uPVC door handle is one with two inline levers, one internal and one external connected by a spindle. They are used to operate the multipoint lock found on uPVC and aluminium doors along with some wooden doors.
Brands & finishes
A damaged uPVC handle could be more than a minor inconvenience. It can also leave your home vulnerable to burglars who could force the lock open and gain access to your property. This is why it's crucial to recognize when your uPVC door handles are beginning to fail and act as soon as possible.
It's an easy task to replace your uPVC door handles. You'll need a few tools and a few precise measurements. In most cases, you can simply screw in your new uPVC handles and you'll be good to go. It's always best to choose locks and handles that are of the highest standard of security.
There are many different types of uPVC handles on the market that you can choose from. These include lever/lever, pads handles, offset and snib. Lever/lever handles are a favorite among homeowners and consist of two movable inline handles. Pad uPVC handles are smaller and feature an offset design. This allows you to protect the exterior of your home after entry.
A uPVC offset handle consists of two pads that are fixed, and the second one movable. This kind of handle can be found on sliding patio doors. Snib handles are similar to offset handles, but they can be utilized on uPVC french doors.
When you are choosing a replacement uPVC door handle, you must take into consideration the style of your current doors and windows. The handle will need to match your existing doors in terms of colour and finish. Some handles come in a range of finishes, including white and black and others are available in more elegant options like chrome or gold.
It is important to ensure that you have your screw-to-screw and PZ measurements correct when you're taking measurements. The PZ measurement is the distance from the center of the hole in the spindle to the centre of the keyhole. The screw-to-screw dimension is the distance between the screw hole on your current handle and the closest screw on the door frame, and it's important to accurately measure this to identify the right replacement.
Measurement and Fitting
The uPVC handle comes with two levers, one on each side of the lock mechanism which make it easy to operate from both inside and outside. Providing a comfortable grip and strain-free functionality handles are an important element of a door's security mechanism. With the right set of uPVC handles, you can be sure that your door is secure from burglars and keep it looking great in the process.
The right uPVC handle can be difficult and confusing as there are numerous sizes, shapes and styles on offer. There are three essential dimensions to consider when choosing a replacement for your uPVC doors. These are the backplate fixing centers, lever and key hole size and the spindle size. Taking into consideration these factors will ensure that the new handle fits perfectly with your uPVC doors and provides an ideal fit.
It's easy to measure these points, but you need to be as precise as you can. You could end having a handle that does not fit properly and causes problems when opening your uPVC doors. The most important measurement is the top screw on the backplate fixing centre, which is commonly called the PZ size. This is the distance between the axis or handle lever of the keyhole and the center of the screw. This is usually 92mm however, it could be different.
Also, make sure that your uPVC door handles have the required number of keyspindles to operate your multi-point locking system. Ideally, these should match the number of keys that you use to lock and unlock your uPVC doors. Certain older doors might only have one spindle that can operate the lock, but more modern doors will have two spindles that allow for independent operation from both sides.
The most undesirable thing to have is a sagging or drooping uPVC door handle as this could cause a huge amount of stress on the internal locking mechanism and may result in broken components. Look for uPVC handles equipped with spring cassettes to avoid this. They are not only visually appealing, but they could also give your door locking mechanism a longer span by removing some of the force that operates it.
Broken Spring Cassettes
A problem with the tubular latch may cause a stiff door handle. This is usually a straightforward fix and can be resolved by repositioning the fixing plates of the replacement handle. First, open the door and check that there aren't any obvious obstructions to the latch plate, such as loose screws or signs of internal parts peeking through. If this isn't the case, it's likely to be one of the spring cassettes within your uPVC handle which may need to be moved.
The easiest way to do this is to purchase an repair kit for door handles. The kit includes all the tools needed to remove the handles, and then reposition them. Simply follow the instructions to do this and you'll soon have a sagging, drooping uPVC door handle that's again fully operable.
A floppy uPVC handle can be caused by thermal contraction but it is more common to signify that the gearbox has failed. This isn't an issue that you can fix at home. You will need the help of a locksmith.
It is essential to choose a genuine replacement gearbox to your uPVC doors. This will ensure everything is installed correctly. Using an aftermarket replacement that is cheaper may cause problems, like a faulty lock or reduced security for your home.
Another option is to replace the entire uPVC handle mechanism and lock. This will not only solve the sagging issue, but will also ensure that your handle is functional and secure. It's important to note though that this isn't an easy or inexpensive solution. It will involve the removal of the existing uPVC handle and replacement with a brand new handle. This is only applicable to double-glazed doors that have sprung handles, since the door will need to be replaced. You can also buy handles that have springs that are built in. This will save you time and money.
Can I install a uPVC Door Handle onto an Aluminium or Timber Door?
There are a variety of things to think about when selecting doors for your house. Aluminium doorways are modern and stylish, while uPVC offers durability, energy efficiency and security. In terms of the style of door you're planning to install the appropriate handle is essential. If you are looking to replace your existing handles or install new ones, it is important that you choose the correct one for your property. Our uPVC door handle replacement guide will help you make the right decision and install them with confidence.
The process of changing the handle on a uPVC door handle is relatively easy and requires just a few tools. First, you'll need to remove the existing handle. It is possible to remove the screws that hold it in place by using the help of a screwdriver. Once the screws are removed, you can simply pull the handle away from the door.
The next step is to take a measurement of the door handle. You'll need to find the centre of the fixing holes on the backplate. This is typically referred to as the PZ measurement and determines the size of the handle spindle. Once you know this information, you will be able to buy a replacement door handle that is the correct size.
There are many kinds of uPVC handles to suit your needs. Some of these handles come with additional security features such as anti-drilling security as well as cylinder guards and mole grips. These uPVC handles can be fitted to uPVC doors, as well as wood and aluminium ones. They are perfect for those who want to enhance the security of their home.
There are also uPVC handles that are more traditional. These can be found in a variety of finishes including gold, black and chrome. They are typically a little more expensive than standard handles but will provide an attractive finish to your door.
Once you have picked the right uPVC door handle, it is essential that you check the dimensions prior to placing an order. You must verify the dimensions mentioned above, along with the keyhole and lever dimensions and the backplate mounting centre to ensure that your new handle is the perfect suitable for your door.